Product Description
All-in-one Integrated Solar Street Light
Integrated solar street lights can't work without sunshine, Please choose suitable product model according to the sunlight intensity of the installed area or amount of solar radiation , and choose product model according to the actual lighting needs ;In the area where the sun is not enough or long-time continuous rainy day, the working time of the solar light will be reduced, this lamp design is mainly based on African average illumination time;
If install this product in the northern hemisphere, make solar panels as possible to wards the south, in order to get maximum light energy; If it is in the southern hemisphere, installing solar panels towards the north. At the same time to avoid the shadow of houses, trees and other obstructions which will reduce the efficiency of the solar panel and shorten its work time.
Integrated solar street light adopt long-life li-ion battery as energy storage devices, which has the advantages of long cycle life (more than two years), stable discharge, etc. Daytime charging conditions is 0 ~ 55 ºC, lower than 0 ºC the charging efficiency will be greatly reduced, when the temperature go back to normal it will recover. A discharge condition at night is - 10 ~ 60 ºC, beyond this range will destroy the battery performance and greatly shorten the discharge time. When using the integrated solar street light, please confirm the local extreme temperature does not exceed the above conditions.
The longest storage period of the integrated solar street light after full charging is about six months. After a long time transportation or storage, need to be timely checked, charged fully. If not use for a long time, please charge the battery every 3months, to avoid the damaged to the battery.
The degree of cleanliness on the surface of the solar panels will also affect the power efficiency, so its surface (such as dust and leaves, oil, etc.) is needed to be clean. We suggest using normal cleanser make regular cleaning
Installation details
Choose the best location for the light pole, pole should use iron or steel for 3-12m height, 40-114 mm in diameter, wall thickness more than 2.0 mm;
Please check whether parts are complete or not after opening the package;
Turn on the switch or fitted insurance tube, cover the solar panel , LED light will be on, and then take off cover, make solar panel accept sunlight, LED light will be off, it means that the light is debugging success.
Set the light into the pole, adjust to the right orientation and elevation, and use a special tool to tighten the security screw, ensure the light is firm.
Product Parameters
| Solar panel :6V , Battery :3.2V Speification |
| Item NO |
LED Chip |
Battery 3.2V |
Solar capacity(mono) |
Products dimension |
Suggestion install height |
| HZ-TY-007 40W |
SMD3030 100PCS |
3.2V 40AH |
6V 40W |
828*300*43/50 |
4-5M |
| HZ-TY-007 50W |
SMD3030 150PCS |
3.2V 50AH |
6V 60W |
1080*359*43/50 |
5-6M |
| HZ-TY-007 60W |
SMD3030 150PCS |
3.2V 60AH |
6V 70W |
1080*426*43/50 |
5-7M |
| HZ-TY-007 70W |
SMD3030 200PPCS |
3.2V 70AH |
6V 80W |
1250*359*43/50 |
7-8m |
| HZ-TY-007 80W |
SMD3030 200PCS |
3.2V 80AH |
6V 90W |
1306*426*43/50 |
8-9m |
| HZ-TY-007 90W |
SMD3030 250PCS |
3.2V 90AH |
6V 100W |
1468*359*43/50 |
9-10m |
| HZ-TY-007 100W |
SMD3030 250PCS |
3.2V 100AH |
6V 120W |
1468*426*43/50 |
9-11m |
| HZ-TY-007 120W |
SMD3030 300PCS |
3.2V 120AH |
6V 140W |
1340*528*43/50 |
10-12m |
| HZ-TY-007 150W |
SMD3030 300PCS |
3.2V 150AH |
6V 150W |
1480*528*43/50 |
12-13m |
| Solar panel :18V , Battery 12.8V |
| Item NO |
LED Chip |
Battery 12.8V |
Solar capacity(mono) |
Products dimension |
Suggestion install height |
| HZ-TY-007 40W |
SMD3030 100PCS |
12.8V 12AH |
18V 40W |
828*300*43/50 |
4-5M |
| HZ-TY-007 50W |
SMD3030 150PCS |
12.8V 18AH |
18V 60W |
1080*359*43/50 |
5-6M |
| HZ-TY-007 60W |
SMD3030 150PCS |
12.8V 24AH |
18V 70W |
1080*426*43/50 |
5-7M |
| HZ-TY-007 70W |
SMD3030 200PPCS |
12.8V 30AH |
18V 80W |
1250*359*43/50 |
7-8m |
| HZ-TY-007 80W |
SMD3030 200PCS |
12.8V 36AHH |
18V 90W |
1306*426*43/50 |
8-9m |
| HZ-TY-007 90W |
SMD3030 250PCS |
12.8V 42AH |
18V 100W |
1468*359*43/50 |
9-10m |
| HZ-TY-007 100W |
SMD3030 250PCS |
12.8V 48AH |
18V 120W |
1468*426*43/50 |
9-11m |
| HZ-TY-007 120W |
SMD3030 300PCS |
12.8V 54AH |
18V 140W |
1340*528*43/50 |
10-12m |
| HZ-TY-007 150W |
SMD3030 300PCS |
12.8V 60AH |
18V 150W |
1480*528*43/50 |
12-13m |
| Common parameters |
| LED Lamp |
High Power LED, High Brightness, High transmittance & Density LED Lens,Die-casting Aluminum |
| |
CRI |
>75 |
| |
LED chip brand |
Brideglux , |
| |
Light Efficiency |
150-180lm/w |
| |
Lifetime |
>50000hours |
| |
Control mode:light-operated,time control,human body induction |
| Solar Panel |
Mono-crystalline silicon.A Quality High Efficiency 20.5% Mono crystalline Silicon |
| |
Brand |
Famous brand |
| |
Lifetime |
15 years |
| Lithium battery |
lithium iron phosphate battery Built-in LED lamp, with charge controller, Soft-Package, Fireproofing, Deep Cycle. Maintenance Free, Blast Protection. |
| |
Capacity |
Lifepo4 |
| |
Lifetime |
5-10 years |
| Adjust Angle |
180° |
| Work time |
8-10hours per day,3 days back up |
| Charge Time |
6-7 Hours (with Enough Strong Shine) |
| Working Temperature |
-30ºC~+70ºC |
| Color temperature |
2700K-6500K(customizable) |
| |
|
| Housing material of main |
Aluminum |
| Waterproof |
IP66 |
| Certificate |
CE / ROHS / IP66 |
| Warranty |
3years |
Main Products
Company Profile
We were established in 2010,We have a strong R&D team which develops new products every year so that our customers can have the latest that technology can provide. We stay up to date with all the new developments in lighting technology. With our strong know how and experiences in the industry, we have been able to maintain our leadership in the LED lighting industry
Certifications & Partners
Our products are CB, CE certificated; ROHS compliant and LM80, LM79 IK08 IP65 approved etc, which has been exported to more than 150 counties worldwide including the Americas, Europe, Africa, Middle East, Asia, Australia and Oceania.
Exhibition & Our Customers
Packaging & Shipping
FAQ
Q1: Are you a manufacturer ?
HONGZHUN: Yes, we have our own factory with over 15 years R&D and manufacture experience base on ISO quality management since 2010.
Q2. Can I have a sample order for Solar Street Light ?
HONGZHUN: Yes, sample order to test and check quality is welcomed. Mixed samples are acceptable.
Q3. How about the lead time of Solar Street Light ?
HONGZHUN: 5-7 days for sample order, 15-25 days for mass production order base on order quantities.
Q4: How do you ship the finished production ?
HONGZHUN: By SEA, AIR or Express(DHL,UPS,Fedex,TNT,etc) are optional.
Q5: Is it OK to print my logo on Solar Street Light ?
HONGZHUN: We provide OEM service to our customers, we can help to make the label and color box according to your requirements.
Q6: How to proceed an order for Solar Street Light ?
HONGZHUN: Firstly, please let us know your detail requirement and application environment, secondly we will recommend some suitable products and solutions to you according to your request. Thirdly, after confirm all the details, customers will issue the purchase order and make the payment to confirm, then we start for the production and arrange the shipment.
Q7: How to deal with the defective?
HONGZHUN: All of our product are produced in strict quality control system, the defective rate is less than 0.2% according to our shipment records. We offer 5 years warranty for this product, if there is any defective during the warranty, please provide the picture or video for the working situation of the defective lights, we will ship the new lights to you within a few days or send it together with your next order.
Q8.What are your payment terms?
HONGZHUN:We typically accept T/T: 30% in advance and 70% before shipping.
Please contact us for other options.
Audited Supplier 
){kind=link}